Help, please !
Posted on Apr 29, 2008 01:50 pm
Member Since: Apr 29, 2008
Hi. I dont know if this is the correct board to place this topic, but im doing it anyway.
Iv got a xenyx1204fx mixingboard with an UCA200 usb-input. I'v connected the boards output to the UCA200s input, and connected it to the computer. Iv also tried different drivers. The point is, Windows Vista names the device USB Audio CODEC, and when i try to test the microphone, nothing happens in the bar (witch should move when i speak). What is the problem?
[ Back to Top ]
Apr 29, 2008 02:10 pm Iv tried that site. Here is the problem:
When im seaking into my mic, the mixer can "hear" me, but the bar in the sound optins (recording) doesent move. Im in kind of hurry, so plase help quick :P
Apr 29, 2008 02:12 pm Quote:
Im in kind of hurry, so plase help quick
I can't speak for anybody else, but these sort of posts always piss me off...so I ignore them...it's just incredibly rude.
Apr 29, 2008 02:13 pm Do i unpack that file? If not, where do I put it?
Apr 29, 2008 02:16 pm Well, im sorry then. But it is a fact. I need the help as fast as possible, and if that piss u off, u dont need to answear. Ięd just heard that this was the best place to aske these sort of questions, mabye it is not.
Apr 29, 2008 02:21 pm It is the best place, it's also good practice to have some manners and appreciate any time people spend helping you for free without being told to "hurry up" while doing it.
Patience is a virtue and appreciation is good manners.
Vista will unzip zip files all by itself...
Apr 29, 2008 02:24 pm Deleted By Herb Utsmelz
Apr 29, 2008 02:52 pm Ok, sorry then.
I have unziped the package, but when i reeboot, i dont see anything different..? Still not working, same problem.
Thx for helping so far.
Apr 29, 2008 02:54 pm After unzipping it, did you run the setup.exe? Did you uninstall the old drivers first, removing all registry entries for it as well? You shouldn't have to do that manually, but it sometimes helps.
Apr 29, 2008 03:01 pm Well, i have no old drivers loaded, so i just installed te 64-bit setup (setup98.exe) and it told me to reebot. I did so, but nothing ever happened. Want me to take some pics and upload?
Noize2uCzar of MidiAdministrator
Apr 29, 2008 10:38 pm One thing I see is that the microphone input is active but the Line Input which is were you have the mixer plugged into is not.
Since: Apr 04, 2002
That is probably the problem right there. The mic is plugged into the mixer and the mixer is plugged into the line inputs. So you need to use them instead of mic.
Apr 30, 2008 09:24 am Hi. That wasent the problem, but i figured out ;) I'd pushed down th CD/Tape to mine, and when i unpushed it - it worked ;)
Thanx for all help, im so grateful!
Related Forum Topics:
- No related forum topics found...weird...
If you would like to participate in the forum discussions, feel free to register for your free membership.