Running Audiophile 192 and 1010lt pos...

Running Audiophile 192 and 1010lt

Posted on Dec 14, 2007 04:25 pm
crazyfou
Member Since: Dec 14, 2007

Hi,

I've been running the Audiophile 192 card in my pc for over a year now, It has always performed great. I recently purchased the 1010lt, I replace the 192, and later reinstalled it because I realized I needed more inputs ( they never really tell you that it's really 8 analog inputs, and two digital) So after much tinkering, I was able to get both cards to work, but my problem is, in the delta control panel, the 192 only has the s/pdif section available, on the far right of the Monitor Mixer tab, all the other inputs are grayed out. With this I'm able to use the 1/2 inputs and outputs, but am not able to use the monitor outputs on the 192. Any help would be appreciated. Thanks

[ Back to Top ]

Noize2u
Czar of Midi
Administrator
Since: Apr 04, 2002

Dec 15, 2007 07:16 pm

It sounds as thought there is a bit of a driver problem then. The control panel reacts with the drivers that are installed.

Does the 1010lt panel have full function's? And does it have its own monitor output's? If so they may be over riding the 192's monitor outputs.

You can try either updating the driver's for the 192 or do an un install then re install them.

It may have gotten corrupt when you installed the 1010lt drivers.