delta 44 to stereo (temporary setup)
Home > Home Recording Forum > Gear Gab > delta 44 to stereo (temporary setup)
Posted on Jan 10, 2007 01:30 am
Loki
Cone Poker
Member Since: Apr 07, 2002
Until I get my monitors fixed I will need another way of playing back the audio, so I was trying to run my delta to my stereo. Heres what I came up with
Delta outs to Aux Returns on the mixer via 1/4"
2t record out to tape inputs on stereo reciever via RCA
this seems like it should work, but all i get is a hum. Same thing when I sent the delta to channels instead of the aux returns. Any ideas? I've done this once before and it worked flawlessly.
[ Back to Top ]
HuePinnipedal Czar (: 3= Member
Since: Apr 11, 2004
Jan 10, 2007 06:42 pm Is your 'tape to main' button down ?
That'll block your input bus .
LokiCone PokerMember
Since: Apr 07, 2002
Jan 11, 2007 12:17 am I do not have a tape to main button...
LokiCone PokerMember
Since: Apr 07, 2002
Jan 11, 2007 12:20 am weird thign is I can put a mic on a channel, speak int it, and hear it through the speaker, which means that the output of the mixer is going to the reciever... just having issues getting the outputs of the computer to go to the mixer i guess.
BeerHunterwww.TheLondonProject.caMember
Since: Feb 07, 2005
Jan 11, 2007 12:41 am Are the channels on the soundcard set to wav out? Sounds like they are set to hardware out.
LokiCone PokerMember
Since: Apr 07, 2002
Jan 11, 2007 12:43 am HW out 1/2 set to Monitor Mixer
HW out 3/4 set to Wave Out 3/4. This is the setup I had when the delta when directly to my monitors.
LokiCone PokerMember
Since: Apr 07, 2002
Jan 11, 2007 12:46 am ah got it working, there was a bad connection from the delta to the soundcard.