multi track recording using 4 bus mixer
Home > Home Recording Forum > Recording Techniques > multi track recording using 4 bus mixer
Posted on Jan 14, 2005 12:14 am
joseph manasan
Member Since: Jan 11, 2005
how will i record a whole band using a 4 bus mixer thru a delta 1010. is it possible? if not, do you have any recommendations what mixer to use?
[ Back to Top ]
Jan 14, 2005 05:55 am Welcome to HRC.
You can submix your whole band in to a total of four different groups and record that to four different tracks, so unless you have extra preamps, some direct outs on channels or are running some instruments direct, you will be limited to four groups.
Noize2uCzar of MidiAdministrator
Since: Apr 04, 2002
Jan 15, 2005 12:38 am Agree with dB there. Does your mixer have direct outs on any of the channels, or possibly inserts?
Jan 16, 2005 11:26 am hey, Noize2u, im a bit stuck on this myself, how would the inserts help? I think mine has some inserts
Noize2uCzar of MidiAdministrator
Since: Apr 04, 2002
Jan 16, 2005 02:53 pm The insert points on some of the larger mixers, or any with actual inserts on say the first channels with XLR inputs, can be cheated into being a direct output. What you will do is only push the cable in to the first click I believe and this will give you a direct output signal from that channel only. So that way say your baord only has 2 sub channels outs, and you need 8, you can just use those channels with the inserts for direct channel outputs.