Delta 410 firewire Midi problem

Posted on

Member Since: Apr 19, 2004

I am having a problem getting cakewalk 9 to record MIDI from my Yamaha S03. The midi cable runs from the synth to the delta 410, and the midi out runs from the delta 410 to the synth. I have set up a multi on the synth to specific sounds that I want, but when played there is no sound through the monitors and no recording within cakewalk. There are alos no LEDs lit up on the Delta 410 so I don't know if it even sees the synth. I think I have the midi in and midi out set up right in cakewalk, but I am not sure. Any tips?

[ Back to Top ]


Czar of Midi
Administrator
Since: Apr 04, 2002


Apr 25, 2004 06:55 pm

Sorry for the late reply, had a busy weekend.

Make sure you have the midi I/O selected properly in the options/midi tab of Pro Audio 9. Then you need to make sure you have the proper port selected in the tracks as well. And the correct midi channel must be selected the same in track.

And I know this will sound dumb, but make sure you have the audio outputs from the synth going to the mixer or wherever you are getting your sound from. If it is going directly into the sound card you need to make sure you have tracks selected to play the audio back live that is coming in from the synth.

Hope that makes sense, if not let me know and I will try to explain a bit better.

Related Forum Topics:



If you would like to participate in the forum discussions, feel free to register for your free membership.