Posted on Jun 12, 2009 11:42 am
biosboy4
Member Since: Jun 12, 2009
I've posted this in 1 other forum, but I figured I would come here and get some feedback as well.
I've re-routed my system completely... went from
2 Community 15's as mains
4 PV 115's as side fills
2 EV 18's bandpass subs
1 Yamaha 218 ported sub
which I have now changed to this
8 SP2-G's (The G model does not have the angled horn)
I took the drivers from my bandpass subs and built a box for them identical to my Yamaha. They sound so much better like this. In fact, I think I'm going to change the drivers in the Yamaha to the same ones and then build 2 more boxes to put more EV drivers in... resulting in 4 218 boxes.
2 QSC RMX 1450's
1 QSC RMX 850
4 CS-800's
plenty of stereo xovers and 31 band EQ's
1 Behringer 8 channel tube pre-amp
1 Behringer 2 channel tube pre-amp/comp
a couple of 2 channel comp
2 sm58's
2 Sennheiser e835
4 PVM 22's
decent drum mics w/ MXL condenser for snare and a couple more for overhead
Yamaha MG2414FX 24-Channel mixer
1- 32 channel 150 ft snake
2- 16 channel 150 ft snakes
I'm considering getting some cheap gates for drums at least... but I'm not sure where gates would be most effective. I thought about running all my condensers into a pre-amp and EQ to get rid of 90% of the monitor frequencies they're getting and then into a gate... what do you think?
Also, I'm thinking about making my own sub-kick... I've heard some homeade ones and they sound so amazing.
Here's how I plan to set up....
6 (maybe all 8) SP2's 3 per side. 2 side by side with backs touching and about 8 inches of a gap in the front... then the 3rd centered on top and turned upside down.
those of course setting on top of 2 218 cabinets standing upright on each side...
Any suggestions? Am I on the right track?
[ Back to Top ]
Related Forum Topics: |
If you would like to participate in the forum discussions, feel free to register for your free membership.