Crossover and Amp help!!
Home > Home Recording Forum > Live Sound Reinforcement > Crossover and Amp help!!
Posted on Jun 13, 2008 11:48 pm
MClilbit
Member Since: Jun 13, 2008
Ohhh I am lost. I can't get any sound out of this set up. Am i doing it wrong? I have 2 amps, 2 mains, and 2 subs, and 1 CX3400 crossover and a mixing board. Here is a link to the diagram of what I am doing.
Someone please help me. My e-mail is will at inthesaucepan.com
[ Back to Top ]
Jun 13, 2008 11:50 pm theshoecenter.com/sound.jpg
Jun 14, 2008 10:19 am Everything appears right as long as you have it set to two way mono mode...whats going on, no sound at all?
Jun 14, 2008 10:51 am The diagram is only part of the information. Do you have the rest on your system?
Jun 14, 2008 11:51 am For starters, since this is for a small to medium sized room, I wouldn't worry about "stereo", I think you'd be better off bridging the amps (if they do) and running it mono...but that's a matter of preference.
I say it looks right, assuming that the input of the crossover is receiving signal...if you are sure of that, then you have signal in your crossover. Your inputs are going in properly, so if the push buttons are setting it to 2 way stereo, near as I can tell you are using the proper outputs...
So with the info provided, I don't personally see the problem.
Jun 14, 2008 05:36 pm I got it to work...evidently there is this button on the mixing board labeled "mute" that was pushed in. =) DUH! Thanks though.
Jun 14, 2008 05:42 pm hahahaha, yeah, all to often it's sumthin dumb...
glad it's workin for ya.