Problem with Behringer UB1204 FX Pro

Posted on

Member Since: Oct 08, 2005

Hi Guys,

I have just bought a brand new UB1204 FX Pro mixer, and i'm having trouble with it straight out of the box.

I have plugged a single mic (sm58 XLR) into each of the channels in turn, but I am getting nothing on the level meter and it seems that the mixer isnt getting any signal at all.
The RCA tape output is also connected to the line-in of my Soundblaster Live! 5.1, but again, no sound or signal.

I'm beginning to think the mixer is faulty, but I am still new to this whole game and it could be something really simple causing me trouble. Before I give up and take the thing back, I just want to make sure I am not missing something.

Is there anything I need to do or button I need to press so that the mixer can receive a signal?

Thanks in advance for any help offered.

[ Back to Top ]


jimmie neutron
Member
Since: Feb 14, 2005


Oct 09, 2005 07:39 am

First off, are you sure your mics are good? The cables good? 2nd, have you turned that little round knob dealie thingie up near the XLR plug-in, labeled "Gain"? You have all the volume sliders on "0" and the pans centered? Do you have the push button dealies depressed to route the signal where it needs to go? Do you have power in the outlet you're using? Is the power supply (if it uses one) for the mixer any good? Have you read the manual? If it's brand new, I'd contact the manufacturer and/or the seller.


I am not a crook's head
Member
Since: Mar 14, 2003


Oct 09, 2005 03:16 pm

Also if you're using a condensor mic, be sure that you have the phantom power turned on. I've done that to myself 3 times this weekend alone.

Related Forum Topics:



If you would like to participate in the forum discussions, feel free to register for your free membership.