Apr 10, 2011 11:45 pm Well, yeah.
But, there is no law that says you can't turn down the inputs on the front of the amp.
If you start to hear distortion coming from the speakers. Turn the amps inputs down. And you should be fine.
power help
Posted on Apr 08, 2011 11:39 am
static48
Member Since: Apr 08, 2011
hi guys i just want to know if you guys think my setup is safe.
I have a behringer EP4000
specs are:
8ohm =550 W
4ohm = 950 W
i have 2 speakers connected per channel in parallel so i am using the amp at 4 ohms.
the speakers are 2 x yorkville TM12C.
they are 250 W each and they are 8ohm.
the other 2 speakers are 2 x Yamaha SP15.
they are 200 W and 8ohm.
sp basically i have my power amp going into the 2 yorkville speaskers and then the yorkvilles are going into the yamahas.
Is this ok? am i shooting too much power to the speakers?
[ Back to Top ]
Apr 10, 2011 11:45 pm Well, yeah.
But, there is no law that says you can't turn down the inputs on the front of the amp.
If you start to hear distortion coming from the speakers. Turn the amps inputs down. And you should be fine.
|
Related Forum Topics: |
If you would like to participate in the forum discussions, feel free to register for your free membership.