native instruments battery 3.0 issue
Home > Home Recording Forum > Computers & Software > native instruments battery 3.0 issue
Posted on Jul 31, 2008 07:11 am
bazis
Member Since: Feb 26, 2008
i have a problem with battery 3.0
when i trigger a sample on my midi controller it wont stop until the hole sample is done playing.
i would want it to stop when i release the pad or key..
i guess there's setting for this, but cant find it..
please help..
baz
[ Back to Top ]
Noize2uCzar of MidiAdministrator
Since: Apr 04, 2002
Aug 01, 2008 08:02 pm There is a choice in the options menu that will let you tell it what you want each pad to do. Hold is probably what it is set on now but you can set it to simply play the sample while the note is held and release when the key is released.
It is a drum module though so if you are trying to play some other type samples in it that are not percussion oriented that might not be advisable.
bazisMember
Since: Feb 26, 2008
Aug 03, 2008 06:26 pm well, i checked that out, but only thing i can find that seems right is the cell activation colummn,
there i have the option to choose: trigger/note on or note off.
that should be it i guess, but no reaction ider way.
under options theres no such thing as hold or release with key or anything at all that makes any change to this issue,
and i know its a drum player, but what if i would use a long cymbal sample and only play half of it. there must be a solution for this, battery is a serious soft. any other suggestions..
Noize2uCzar of MidiAdministrator
Since: Apr 04, 2002
Aug 03, 2008 08:20 pm Well I don't have a manual for Battery so I can't honestly say. But almost every drum synth I have worked with has and option for that. I am pretty certain that Battery would as well.
It might be in another area instead of on the trigger or pad control area.
bazisMember
Since: Feb 26, 2008
Aug 04, 2008 12:58 am yes, i guess i'll check the subject in other forums as well, thx for the help anyways
bz