Jan 24, 2008 08:03 pm No real ideas but are you completely sure you are getting the L & R in those tracks and not two L's or 2 R's or two mono's ???
Out Of Phase Playback in Acid Pro 6
Posted on Jan 24, 2008 06:03 pm
mr. stonerock
Member Since: Jan 24, 2008
I am recording the Left and Right channels of a stereo track from my Yamaha AW4416 workstation into Acid Pro 6. The playback of the recording is slightly out of phase, producing a very noticable "flange" effect. I am not using a flange effect during recording or playback. I cannot hear the flanging while monitoring recording either at the output source of the AW4416 or the Echo Gina 3G audio interface connected to my PC, still the phasing/flanging is obvious during playback of the recording, and can be heard while monitoring the playback thru headphones and/or speakers. (My connection type is analog 1/4 TRS.)
Your advice is greatly appreciated.
Sincerely,
Steve Smith
[ Back to Top ]
Jan 24, 2008 08:03 pm No real ideas but are you completely sure you are getting the L & R in those tracks and not two L's or 2 R's or two mono's ???
Jan 25, 2008 04:16 pm There may be a feedback loop of some sort in your setup. A slight amount of latency may be introduced during the loop, producing either an echo or a comb filtering effect.
What's your signal path when you experience this flanging?
Jan 26, 2008 02:40 pm The clip maybe also playing back at a different speed or bpm then the original recording. Check through your settings and make sure the audio clip is set to play back at the original tempo.
|
Related Forum Topics: |
If you would like to participate in the forum discussions, feel free to register for your free membership.